Stryker Osteosynthesis Ag

Stryker Osteosynthesis Ag-48
The Hoffmann® II Compact ™ has built upon these principles, and today is the gold standard in modular external fixation.Certainly, the Hoffmann ® II family of products is unmatched in its ease-of-use, versatility, and patient comf Open the catalog to page 1 COMPONENTS The standard 4-Hole Pin Clamp is designed to build a variety of frames.Position and insert the fourth Pin on the same side close to the fracture line.

Tags: One Hundred Great EssaysSteroids In Sports Research PaperHow To Write References In Research PaperWorking Stress ThesisOnline Way To Write An EssayCatholic High School Entrance EssaysAp World Thesis StatementsBest Homework Apps

Please contact your Stryker representative if you have questions about the availability of Stryker products in your area....

We use cookies to make interactions with our website easy and meaningful, to better understand the use of our services, and to tailor advertising.

Continue by inserting a pin on each side closest to the fracture line.

Place one Pin to Rod Coupling over each Half Pin and keep them at the desired distance from the skin. Open the catalog to page 5 Osteosynthesis STEP 7: Using the Thumbwheel, tighten the connecting Rods at the desired position in clockwise rotation.

RELATIVE CONTRAINDICATIONS • • • • If uncertainty exists with regard to the anatomic location of the neurovascular structures. Open the catalog to page 3 OPERATIVE TECHNIQUE STEP 1: Before Drilling, locate the desired screw location and select the appropriate drill guide length to ensure soft tissue protection.

Drill the first hole at least 5mm from the fracture site using the 4 holes drill guide and the predrilling assembly. NOTE: Please refer to the Apex Pin Fixation Brochure (Literature Number 5075-4-000) for detailed instructions about using the Apex Pin System.

View Full-Text ) Navigated Stryker driver with 6.5 × 50 screw with screen projection showing the same 6.5 × 50 virtual screw. ( This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited Satarasinghe, P.; Hamilton, K.

The instruments used at each step are color-coded to avoid confusion on the navigation monitor while advancing into the pedicle and vertebral body (match stick drill bit in “A”, green.

(1) Following visualization of neuroanatomy using intraoperative CT, a navigated 3-mm match stick drill bit was inserted at an anatomical entry point with a screen projection showing a virtual screw.

(2) A Navigated Stryker Cordless Driver with an appropriate tap was used to access the vertebral body through a pedicle with a screen projection again showing a virtual screw. Thoracic, Lumbar, and Sacral Pedicle Screw Placement Using Stryker-Ziehm Virtual Screw Technology and Navigated Stryker Cordless Driver 3: Technical Note.


Comments Stryker Osteosynthesis Ag

The Latest from ©